swashdrive slide 2 brushless

REF: SWS02

From the prestigious Australian brand Swashdrive, it is an improvement on the Slide1.
The new brushless motor, which powers the new Swashdrive Slide 2 machine, is completely new technology, with minimal starting voltage to power up the electronic circuit board, which controls the new 9V motor.
An initial minimum voltage of 9V is needed to activate the electronic circuit board that controls the motor. This may seem high, but that's the way it's designed and it won't cause any damage. The current draw at 9V is only about 0.1 amps (0.9 watts) and 20V will draw 0.5 amps and give a maximum power of 10 watts.
The engine may even seem sluggish at first, but this is part of its electronic programming to ensure smooth engine acceleration up to the desired revs. This is very different to a typical brush motor, which responds instantly when turned on.
The brushless motor also has an internal speed control circuit that maintains very precise speed settings as the pressure varies during operation.
The result is super smooth running and zero engine suffering.
Important to note - input power is sensitive to + - polarity
The positive (red) wire should be connected to the center of the RCA connector.
In case of changing the polarity the machine does not start working.
Also in case of an overload cut the current to avoid the destruction of the motor.rga. In this case the motor will trip and reset after 3 seconds before restarting.
Operating Voltages:
9 volts at cranking will deliver 2,000 rpm or 33 CPS
11 volts = 3000 rpm / 50 CPS
13 volts = 6000 rpm / 100 CPS
16 volts = 9000rpm / 150 CPS
The maximum speed is 22 volts
Made of stainless steel and injected black polyamide casing, which gives it great resistance to shocks.

Brushless motor / RCA connection

More product information
 
Included taxes
Last items in stock
Free shipping

From 121€

Online payment

100% safe

REF: SWS02

From the prestigious Australian brand Swashdrive, it is an improvement on the Slide1.
The new brushless motor, which powers the new Swashdrive Slide 2 machine, is completely new technology, with minimal starting voltage to power up the electronic circuit board, which controls the new 9V motor.
An initial minimum voltage of 9V is needed to activate the electronic circuit board that controls the motor. This may seem high, but that's the way it's designed and it won't cause any damage. The current draw at 9V is only about 0.1 amps (0.9 watts) and 20V will draw 0.5 amps and give a maximum power of 10 watts.
The engine may even seem sluggish at first, but this is part of its electronic programming to ensure smooth engine acceleration up to the desired revs. This is very different to a typical brush motor, which responds instantly when turned on.
The brushless motor also has an internal speed control circuit that maintains very precise speed settings as the pressure varies during operation.
The result is super smooth running and zero engine suffering.
Important to note - input power is sensitive to + - polarity
The positive (red) wire should be connected to the center of the RCA connector.
In case of changing the polarity the machine does not start working.
Also in case of an overload cut the current to avoid the destruction of the motor.rga. In this case the motor will trip and reset after 3 seconds before restarting.
Operating Voltages:
9 volts at cranking will deliver 2,000 rpm or 33 CPS
11 volts = 3000 rpm / 50 CPS
13 volts = 6000 rpm / 100 CPS
16 volts = 9000rpm / 150 CPS
The maximum speed is 22 volts
Made of stainless steel and injected black polyamide casing, which gives it great resistance to shocks.

SWASHDRIVE Slide 2 Brushless

SWASHDRIVE Slide 2 Brushless