MUSO-VD-S - source of Alimenatcion green MUSOTOKU with bracket
1 Item Items
Warning: Last items in stock!
MUSOTOKU power supply is the best market and one of the most complete sources. Keep your coil or rotary machines in operation all the time you need. Its heavy-duty 5A offers you a clean and stable power so that your machine will not suffer any UPS and downs or overheating during long sessions. The voltage can be adjusted from 2 to 16 Volts at intervals of 0, 1V, being able to control the impact of the machine with great accuracy. If you need extra power to your machine you can use the function NITRO.
NITRO is an extra injection of energy for your machine for 0.5 seconds after pressing the foot switch, it will make that any machine starting always, regardless of whether the speed is too low, is no longer necessary to increase the speed of your Rotary so operate. Thanks to the 5A you have guaranteed sufficient power to be able to work with the next generations of tattoo machines. With MUSOTOKU power will never be your problem. It has two inputs can be connected to the supply two machines at the same time.
Output voltage from 2V to 16V, adjustable in 0.1V steps.
The perfect range for machines of coils and rotating with precision just you need, no more, no less.
x 4 work (non-volatile) rewritable memories.
Change comfortably to your predefined settings using a single button, without complications, these will be saved even by turning off the supply.
NITRO pulse for fast start-up of the machine (configurable YES/NO).
Absolutely safe. NITRO It works exclusively within the safe voltage ranges for your Rotary, never will make it higher, in addition NITRO It will improve the health and performance of your engine with zero probability that the motor stops on boot. Nitro is perfect for hard as Cheyenne machines, or for those settings that is somewhat more difficult to start.
New technology Cool Power (sessions without-limits).
Musotoku is not heated and maintains stable output always, no matter how long is your session.
x 3 pedal modes: Normal, automatic (without pedal) and semi-automatic (one-touch ON/OFF)
All styles of foot pedal no-pedal handled easily with a single button.
New Pedal way amplified the pedals harder.
A new technology, effective even against dirt and dust on the contacts of the pedal.
Session clock (minutes to hours).
It allows you to work with rates depending on the time. With ability to PLAY/STOP/RESET, and shortcut quick to stop and start timer
Detection of machine failure.
Permanent control of the maximum for your machine. Musotoku stops and warns if it is an insecure bug in tattoo machine.
Display high contrast OLED.
Visible and readable even under hygienic plastics.
Automatic shut-off (after 1 hour without use).
Absolute simplicity and energy saving. It will immediately start again when you touch any control or pedal.
Pedal machine high performance connectors.
Guaranteed for life. The best plug jack 6, 35mm we have found. Notice it hard because it is hard.
Dimensions: 116 x 72 mm, 24mm height.
It is small, perfect for travel, conventions and working in confined spaces.
Weight: 169 gr.
Product manufactured in Spain.
Material: Solid aluminum of 2 mm.
Unlike other sources of food made of plastic MUSOTOKU It will not break, if not that will bend, they have done everything possible to reduce the impact. Its casing is light and hard at the same time.
Input voltage: 110VAC-240VAC 50/60 Hz (compatible worldwide).
2 years total warranty from the manufacturer against defects in material and manufacturing. And guaranteed jack connectors for lifetime, because we want to cover your weaknesses.